CDM530PH is a hydrostatic pneumatic roller with maximum operating weight of 30 tons. It is suitable for compacting the road surface composed of sticky or non-sticky material such as sand, detritus, stabilizing material, asphalt concrete, etc., especially the asphalt surface on high grade highway.

1.Supercharged Cummins engine 6BTA5.9C made in China and Rexroth hydraulic components
2.Caliper type service brake and hydraulic cutoff parking brake for better safety
3.Super operating weight for better compaction and higher efficiency
4.Double adjustable instrument bracket and control mechanism for easier operation
5.Power operated watering system with imported watering pump and big water tank
6.Compact structure, low gravity center, nice appearance
7.Hydrostatic drive with stepless gear change
8.Air conditioning and heating provide good environment for operator

Specifications
Max.operating weight(kg)         30000
Min.operating weight  (kg)        22000
Single tire load(kg)　　　　       2730
Earth connection specific pressure (kPa)      330-460　　
 Length×Width×Height (mm)    4900×2790×3100
Turning angle(°)　　　　　　　30
Min.turning radius(mm)              8000
Travel speed
I　(km/h)                        0-6
II　(km/h)                       0-16
Grade ability(%)                   20
Engine specifications
Model                         6BTA5.9
Type                        Vertical, water-cooled, 4-stroke, direct injection
Rated power /RPM  (kw/r/min)           125/2300
Max. Torque /RPM  (N.m/r/min)          630/140
Total displacement (L)                    5.9
Starter motor power (kw)                  6
Starter motor voltage (v)                  24
Fuel tank capacity (L)                    200
Hydraulic system
Drive system
Vibration pump                      Variable displacement piston pump
Vibration motor                      Ration displacement piston motor
Steering system
Steering model                     Full hydraulic steering system
Steering pump                         HD9196
Model of steering gear                   BZZ1
Steering system pressure (MPa)            14

Axle and tire
Axle type                      Central reduction + hub reduction
Tire                            Special tire for rollers
Brake system
Service brake type               Air-over-oil disc brake on rear axle
Parking brake type             Manual operated brake on transmission
Oil tank capacity
Fuel tank capacity                             200L
Hydraulic oil tank capacity                      120L
A/C System
Model                                      TY46G4
Refrigerating capacity                          4600W
Heating capacity                              5000W

Note: The specification is subject to change for the modification without notice.