The rated payload of CDM855 wheel loader is 5 tons, and the rated bucket capacity is 3.0 m3. It is a big size wheel loader. It has long wheelbase and centrally symmetrical structure. Its lateral stability is good. It is suitable for earth moving, digging and towing in the fields like mining, water conservancy project, infrastructural construction, etc.

1.Long wheelbase chassis improves stability and increases the tip load
2.Front and rear tracks superpose on each other for extending the life of tire.
3.Heavy load driving system assures long-time work in intensive operating condition
4.Air conditioning and heating system provide better operation environment
5.Spring suspended and well-sealed cabin has good effect of sound insulation and wide visibility
6.Anti-abrasion integral cutting edge with teeth and adapters, prolong the life of bucket.
7.Optional implements: Coal bucket, High dump, Rock bucket, Log fork, Side dump.

Specifications

Operating weight （kg)                           16600
Length×width×height  (mm）                       7900×3000×3400
Rated payload  （kg)                             5000
Bucket capacity （m3）                                      3.0
Max.rimpull  （kN）                                 ≥170
Max.dumping height (mm)                              3103
Dumping reach (mm)                                    1210
Lifting time of lift arm （s)                             ≤6.0
Total hydraulic cycle time   (s)                                ≤11

Diesel engine
Model                           Weichai WD615G.220
Type                      Vertical, water-cooled, 4-strokes, direct injection
Rated power（kW)/RPM（rpm)                 162/2200
Max.torque（N•m）/RPM （rpm)       860/1400   1600
Min.fuel consumption（g/kW•h)                       215
Total displacement（L）                               9.726

Transmission and Torque converter
Hydraulic torque converter
Type               Single stage，four elements duo-turbine
Cooling type         Pressurized circulation of oil cooling
Inlet pressure of torque converter（MPa）    0.3-0.45
Outlet pressure of torque converter （MPa）     0.1-0.20
Transmission
Type                          Planetary, hydraulic shift
Travel speed
Ⅰ Forward                          0-11.5  km/h
Ⅱ Forward                          0-36  km/h
Reverse                             0-16  km/h

Axle and Tyre
Axle
Final drive type                      Spiral bevel gear one stage reduction
Speed reduction ratio                                    5.2857:1
Hub reduction
Type                                 Spur gear planetary drive
Speed reduction ratio                                   4.4:1
Tyre specifications                              23.5-25-16PR

Brake system
Service brake type                       Disc brake on four wheels with air over oil
Parking braking and emergency brake type         Manual control dry disc brake
Air pressure for brake  (MPa)                           0.7-0.78  

Implement hydraulic system
Flowrate of implement pump (ml/r)                       100
System operating pressure (MPa)                         16

Steering system
Type                                 Load-sensing hydraulic steering system
System operating pressure  (MPa)                       16
Min.Turning radius
Outside of bucket  (mm)                              7175
Tire center  (mm)                                   6242 

Oil Tank Capacity
Fuel tank capacity (L)                                 235
Hydraulic oil tank capacity (L)                          220

A/C System
Refrigerating capacity (w)                          4500
Heating capacity (w)                              5800

Note: The specification is subject to change for the modification without notice.