|
The rated payload of CDM835 wheel loader is 3.5 tons, and the rated bucket capacity is 1.8m3 It is a medium size wheel loader. Transmission and control system are improved on the basis of CDM833 so that the operation is easier.
1.Electro-hydraulically controlled transmission with automatic shift and pilot control for implement hydraulic system are adopted
2.Hydraulic steering system makes the turning easier
3.Frames are simple in structure and accessible in maintenance
4.Air conditioning and heating system provide better operation environment
5.Front and rear frames use long span connecting structure for reducing the stress in hitch pin
6.Anti-abrasion integral cutting edge with teeth and adapters, prolong the life of bucket.
7.Long wheelbase and centrally symmetrical structure make the front and rear tracks superposed on each other for extending the life of tire.
8.Optional implements: High dump, Coal bucket.
Specifications
Bucket capacity（m3 ） 1.8
Rated payload（kg) 3500
Lifting time of arm(s) ≤6.0
Total hydraulic cycle time(s) ≤11.0
Transportation dimension
Length×width×height（mm） 7180×2600×3120
Max. breakout force（KN） ≥111
Max.dumping height（mm） 2890
Dumping reach（mm） 1083
Max. turning angle(°) ±35
Operating weight (kg) 11300
Engine
Model TD226B-6G
Type Vertical, water-cooled, 4-stroke, direct injection
Rated powert(Kw)/RPM（rpm） 98/2200
Max. torque（N.m）/RPM（rpm） 525/1500
Nominal fuel consumption（g/kw•h） 210
Total displacement （L） 6.234
Fuel light diesel oil
Torque converter and transmission system
Torque converter
Type Single-stage、single-phase、three-element
Torque conversion coefficient Ko 3.5
Cooling type Oil cooled and pressurized
Torque converter inlet pressure (Mpa) 0.60
Torque converter outlet pressure (Mpa) 0.18
Transmission
Type Fixed shaft, power shift, spur gear, constant mesh
Gears Three speeds forward, three speeds reverse, fixed shaft type, electro-hydraulic shifting
Travel speed （km/h）
Ⅰ Forward 0～6.5
Ⅱ Forward 0～12.0
Ⅲ Forward 0～38.0
Ⅰ Reverse 0～6.8
Ⅱ Reverse 0～12.5
Ⅲ Reverse 0～33.5
Axle & Tyre
Axle
Final drive type Spiral bevel gear one stage reduction
Speed reduction ratio 5.286:1
Wheel hub reduction
Model Spur gear planet drive
Speed reduction ratio 3.882：1
Tyre specifications 17.5-25 12PR
Brake system
Service brake type Double loop disc brake on four wheels
Parking brake type Flexible shaft controlled disc brake
Emergency brake Manual control air-fluid brake
Brake pressure（Mpa） 0.78
Implement hydraulic system
Displacement of Implement pump (ml/r) 80
System working pressure（Mpa） 15.7
Pilot valve DXS-00
Oil supply valve WYF-65
Steering system
Type Hydraulic assist steering
Structure type Series connect with implement pump
System working pressure（Mpa） 14
Min.turning radius
Outside of bucket（mm） 6338
Tire center（mm） 5445
Oil Tank Capacity
Fuel tank capacity(L) 140
Hydraulic oil tank capacity 140
A/C System
Refrigerating capacity(w) 4500
Heating capacity(w) 5800
Note: The specification is subject to change for the modification without notice. |
