The rated payload of CDM855E wheel loader is 5 tons, and the rated bucket capacity is 3.0 m³. It is a big size wheel loader. It has long wheelbase and centrally symmetrical structure. Its stability is good. It is suitable for earth moving, digging and towing in the fields like mining, water conservancy project, infrastructural construction, road construction, etc.
1、Air boosted parking brake for better safety
2、Pilot control is used in implement hydraulic system
3、Long wheelbase chassis improves the stability and increases tip load
4、Air conditioning and heating system provide better operation environment
5、Spring suspended and well sealed cab provide sound insulation and wide visibility
6、Anti-abrasion integral cutting edge with teeth and adapters, prolong the life of bucket.
7、Optional attachments: Coal bucket, High dump, Rock bucket, Log fork, Side dump.

Specifications:

Bucket capacity（m³ ）                       3.0
Rated payload（kg)                           5000
Lifting time of arm(s)                      ≤6.0
Total hydraulic cycle time(s)                ≤11
Transportation dimension 
Length×width×height（mm）             7900×3000×34000
Max. breakout force（KN）                    ≥170
Max.dumping height（mm）                     3103
Dumping reach（mm）                          1210
Max. turning angle(°)                       ±35
Operating weight (kg)                       16800

Engine
Model                                    WD615G.220
Type                               Vertical, water-cooled, 4-stroke, direct injection
Rated powert(Kw)/RPM（rpm）              162/2200
Max. torque（N.m）/RPM（rpm）            860/1400~1600
Nominal fuel consumption（g/kw•h）            215
Total displacement （L）                     9.726
Fuel                                   light diesel oil

Torque converter and transmission system
Torque converter
Type                                      Single stage four-element(duo-turbine)
Torque conversion coefficient Ko                  4.0
Cooling type                               Oil cooled and pressurized circulation
Torque converter inlet pressure (Mpa)            0.3-0.45
Torque converter outlet pressure (Mpa)           0.1-0.2

Transmission
Type                                Planetary type with hydraulic shifting
Travel speed（km/h)
Ⅰ Forward                                       0~11.5
Ⅱ Forward                                       0~36
Reverse                                          0~16

Axle & Tyre
Axle
Final drive type                       Spiral bevel gear one stage reduction
Speed reduction ratio                            5.286:1
Wheel hub reduction
Model                                  Spur gear planet drive
Speed reduction ratio                            4.4:1
Tyre specifications                           23.5-25 12PR

Brake system
Service brake type                Air boosted disc brakes on four wheels
Parking brake type                Flexible shaft controlled disc brake
Brake pressure（Mpa）                            0.7~0.78

Implement hydraulic system 
Displacement of Implement pump (ml/r)               100
System working pressure（Mpa）                     15.7
Pilot valve                                       DXS-00
Oil supply valve                                  WYF-65

Steering system
Type                                   Full hydraulic load steering system
System working pressure（Mpa）                      16
Min.turning radius   
Outside of bucket（mm）                            7161
Tire center（mm）                                  6240

Oil tank capacity
Fuel tank capacity                                 235L
Hydraulic oil tank capacity                        220L

A/C   System
Refrigerating capacity                             4500W                             
Heating capacity                                   5800W

Note: The specification is subject to change for the modification without notice.