The rated payload of CDM853 wheel loader is 5 tons, and the rated bucket capacity is 3.0m³. It is a big size wheel loader. It is of short wheelbase for better maneoverability, and it is suitable for mine, water conservancy work site, infrastructural construction project, cargo loading/unloading field, road construction site, etc. It has wide application as earth moving, digging and towing, etc.

1.Weichai WD615 supercharged and inter-cooled engine provides strong power
2.Short wheel base chassis improves steering flexibility and operation efficiency
3.Air conditioning and heating system provide better operation environment
4.Spring suspended and well-sealed cabin have good sound insulation and wide visibility
5.Single tilt lever and Z-bar linkage
6.Heavy load driving system assures long-time work in intensive operating environment
7.Anti-abrasion integral cutting edge with teeth and adapters prolong the life of bucket.

Specifications:

Bucket capacity（m³ ）                        3.0
Rated payload（kg)                            5000
Lifting time of arm(s)                       ≤6.0
Total hydraulic cycle time(s)                ≤11.5
Transportation dimension 
Length×width×height（mm）             7530×3000×3330
Max. breakout force（KN）                    ≥155
Max.dumping height（mm）                      3100
Dumping reach（mm）                           1130
Max. turning angle(°)                        ±35
Operating weight (kg)                         15850

 Engine
Model                                       WD615G.220
Type                               Vertical, water-cooled, 4-stroke, direct injection
Rated powert(Kw)/RPM（rpm）                   162/2200
Max. torque（N.m）/RPM（rpm）             860/1400~1600
Nominal fuel consumption（g/kw·h）             215
Total displacement （L）                        9.726
Fuel                                      light diesel oil

 Torque converter and transmission system
Torque converter
Type                             Single stage four-element(duo-turbine)
Torque conversion coefficient Ko                  4.0
Cooling type                               Oil cooled and pressurized circulation
Torque converter inlet pressure (Mpa)            0.3-0.45
Torque converter outlet pressure (Mpa)           0.1-0.2

 Transmission
Type                            Planetary type with hydraulic shifting
Travel speed
Ⅰ Forward                                       0~11.5km/h
Ⅱ Forward                                       0~36.0km/h
Reverse                                          0~16.0km/h

 Axle & Tyre
Axle
Final drive type                       Spiral bevel gear one stage reduction
Speed reduction ratio                         5.2857:1
Wheel hub reduction
Type                                 Spur gear planet drive
Speed reduction ratio                          4.4:1
Tyre specifications                         23.5-25-16PR

 Brake system
Service brake type                Air boosted disc brakes on four wheels
Parking brake type                Flexible shaft controlled disc brake
Brake pressure（Mpa）                         0.7~0.78

 Implement hydraulic system 
Displacement of Implement pump (ml/r)           100
System working pressure（Mpa）                   16

 Steering system
Type                                   Full hydraulic load steering system
Displacement of steering pump                    80
System working pressure（Mpa）                   16
Min.turning radius   
Outside of bucket（mm）                         6650
Tire center（mm）                               5624
Oil tank capacity
Fuel tank capacity                              270L
Hydraulic oil tank capacity                     235L

 A/C system
Refrigerating capacity                         4500W
Heating capacity                               5800W

Note: The specification is subject to change for the modification without notice.